Updated Oct 13, 2024 300-615 Exam Dumps - PDF Questions and Testing Engine
New (2024) Cisco 300-615 Exam Dumps
Cisco 300-615 certification exam is a comprehensive exam that tests the candidate's knowledge and skills in troubleshooting data center infrastructure. It is a valuable certification for professionals who want to enhance their career in the networking industry, and it can open up new opportunities for growth and advancement. By preparing well and taking the exam seriously, candidates can successfully earn the certification and demonstrate their expertise in troubleshooting Cisco data center infrastructure.
Obligatory Prerequisites
Though Cisco 300-615 is associated with the professional stage, there are no mandatory prerequisites to be met for becoming eligible. It is open for all. However, it won’t hurt if the test-taker has already explored the data center industry and has gained hands-on experience of about three to five years in generating these solutions.
NEW QUESTION # 25
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION # 26
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION # 27 
Refer to the exhibit. One of the vPC VTEPs fails to route VXLAN traffic to vPC connected hosts. When the issue was being diagnosed, it was discovered that the packets that were expected to be forwarded to the MAC address on the SWITCH-VTEP-1 are instead forwarded to the MAC address on SWITCH-VTEP-2 and then dropped. Which action resolves the issue?
- A. Configure a distributed anycast gateway on both peers
- B. Configure a different secondary IP address for one of the vPC peers
- C. Configure ip arp synchronize under the VPC domain on both peers
- D. Configure peer-gateway under the VPC domain on both peers
Answer: D
NEW QUESTION # 28
Refer to the exhibit.
An engineer discovers that if the vPC peer link goes down, half of the devices in VLAN 20 experience connectivity issues with the external networks Which action resolves the issue?
- A. Configure a dedicated Layer 3 link between vPC peers
- B. Exclude the non-vPC VLANs from vPC peer link
- C. Add the non-vPC SVIs in the dual-active exclude VLAN list
- D. Allow non-vPC VLANs on a second trunk between the two vPC peers
Answer: C
NEW QUESTION # 29
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager Which set of steps resolves the issue?
- A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - B. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - C. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - D. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM.
Answer: D
NEW QUESTION # 30
Refer to the exhibit.
Refer to the exhibit. VSAN traffic is not routed as expected. Which action should be taken to resolve the issue?
- A. Configure the hello timer to match the neighbor
- B. Reset the error packet counter
- C. Configure the FSPF dead interval with a value higher than 80 seconds
- D. Reset the inactivity timer on switch-2
Answer: A
Explanation:
Reference:
https://www.cisco.com/en/US/docs/switches/datacenter/nexus5500/sw/troubleshooting/guide/n5500_ts_sans.html
NEW QUESTION # 31
Refer to the exhibit.
A certificate is implemented on the security configuration on the Cisco ACI controller. A customer receives a "Connection Not Secure" error in a browser every time the customer logs in to the Cisco APIC GUI. Which action resolves the issue?
- A. Configure a corporate certificate authority for the certificate.
- B. Include a private key with the certificate.
- C. Use a browser that supports keys of 2048 bits.
- D. Add a 1536-bit key to the APIC GUI.
Answer: C
NEW QUESTION # 32
Refer to the exhibits. An engineer troubleshoots switch N5K1, which fails to receive traffic from the file server. Which set of actions resolves this problem?
- A. Bind native VLAN 10 with Ethemet1/10 and allow VSAN 101 in trunk configuration.
- B. Assign native VLAN 10 with fc2.'l - 2 and allow VLAN 10 in trunk configuration.
- C. Bind native VLAN 10 with Ethemet10/1/1 and allow VLAN 10 in trunk configuration
- D. Assign native VLAN 10 with vfc111 and allow VLAN 1101 in trunk configuration.
Answer: C
NEW QUESTION # 33
Refer to the exhibit.
A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
- A. Enable ISSD after the downgrade is complete.
- B. Reload the switch.
- C. Shut and no shut the interfaces to the FEX.
- D. Roll back to the original image.
Answer: A
NEW QUESTION # 34
Refer to the exhibit.
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. The interface is working correctly and fully operational, but it is not in use.
- B. "out-of-service" is the default interface status in ACI.
- C. The interface policy is misconfigured.
- D. "out-of-service" indicates that no service graph is in use for this interface.
Answer: C
NEW QUESTION # 35
Refer to the exhibit. The cURL command fails to complete. Which action resolves the problem?
- A. Remove ".json\" from the URL.
- B. Change ".json" to ".xml" at the end of the URL.
- C. Add -H "X-Auth-Token" to the command.
- D. Include -p "password" in the command.
Answer: D
NEW QUESTION # 36 
Refer to the exhibit. The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. configure terminal action
- B. environment variable
- C. event-default action statement
- D. event statement
Answer: D
Explanation:
Section: Automation
NEW QUESTION # 37
Refer to the exhibit.
A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages. Which action resolves the problem?
- A. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP.
- B. Manually configure NTP in the Guest shell.
- C. Update the Python packages on the Cisco Nexus switch directly.
- D. Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.
Answer: A
NEW QUESTION # 38
Refer to the exhibit.
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Configure SSH logins on Cisco MDS switch.
- B. Include specific users into MDS role configuration.
- C. Configure the role name to match the group name on Microsoft Active Directory.
- D. Integrate Cisco MDS with Microsoft Active Directory.
Answer: C
NEW QUESTION # 39
Refer to the exhibit.
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
- B. Statically configure the target information in the Boot Policy.
- C. Configure a QoS policy on the vNIC.
- D. Configure an MTU size of 9000 on the appliance port.
Answer: B
NEW QUESTION # 40
Refer to the exhibit.
A Cisco UCS B-Series Blade Server is configured to boot from a shared storage via an iSCSI network. When a service profile is associated with the blade, the blade fails to attach the LUN. Which action resolves the issue?
- A. Implement a Layer 3 connection between the blade and the storage
- B. Establish a Layer 2 connection between the blade and the storage
- C. Register the blade as an initiator on the storage array
- D. Place VLAN 0 on the interface that connects to the storage
Answer: D
NEW QUESTION # 41
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
- A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - B. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - C. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - D. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooti
NEW QUESTION # 42
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?
- A. Disable the telemetry feature
- B. Disable the inband-telemetry feature
- C. Disable the software-telemetry feature
- D. Disable the hardware-telemetry feature
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION # 43
Refer to the exhibit.
A Cisco UCS Fabric Interconnect fails during the upgrade process. The working images of the fabric interconnect are stored on the bootflash. Which set of commands recovers the fabric interconnect?
- A. loader> dir
loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin
switch(boot)# init system
switch(boot)# reload
switch(boot)# load ucs-6300-k9-system.5.0.2.N1.3.02d56.bin - B. loader> dir
loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin
switch(boot)# copy ics-manager-k9.1.4.1k.bin nuova-sim-mgmt-nsg.0.1.001.bin switch(boot)# boot ucs-6300-k9-system.5.0.2.N1.3.02d56.bin - C. loader> dir
loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin
switch(boot)# copy ics-manager-k9.1.4.1k.bin nuova-sim-mgmt-nsg.0.1.001.bin switch(boot)# load ucs-6300-k9-system.5.0.2.N1.3.02d56.bin - D. loader> dir
loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin
switch(boot)# init system
switch(boot)# reload
switch(boot)# boot ucs-6300-k9-system.5.0.2.N1.3.02d56.bin
Answer: C
NEW QUESTION # 44
Refer to the exhibit.
A customer network uses OSPFv2 and MP-BGP protocols A network administrator installs a new Cisco Nexus Switch in the data center but experiences a BGP RIB failure Which action solves the issue?
- A. Use a filter list for OSPF to filter both routes
- B. Implement next-hop-self
- C. Configure the route as a BGP backdoor
- D. Change the administrative distance of OSPF to 220
Answer: D
NEW QUESTION # 45
A Cisco UCS B-Series Blade Server is configured to boot a VMware ESXi host from an EMC VNX storage array by using a Fibre Channel SAN. The boot order is confirmed to be configured as expected, but the server fails to boot from the SAN. Which action resolves the problem?
- A. Set the boot LUN to the highest LUN ID in the storage array.
- B. Set the same WWNN pools for vHBA adapters.
- C. Set the boot LUN to the lowest LUN ID in the storage array.
- D. Set the same WWPN pools for vHBA adapters.
Answer: B
Explanation:
Section: Storage Network
NEW QUESTION # 46
A network engineer must configure SNMP monitoring on the Cisco Nexus 5000 Series Switch.
The engineer issues the SNMP-server user testuser enforcePriv command but receives this message: "Unable to update CLI users database". Which change to permissions for testuser resolves the issue?
- A. Restrict read permission.
- B. Add read permission.
- C. Restrict write permission.
- D. Add write permission.
Answer: D
NEW QUESTION # 47
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 48
......
Updated Verified Pass 300-615 Exam - Real Questions and Answers: https://pass4sures.freepdfdump.top/300-615-valid-torrent.html
